Newsletter
Catalog
|
|
|
MALTBY CT250 MAXIMUM MOI DRAW DRIVER HEADS
MALTBY CT250 MAXIMUM MOI DRAW DRIVER HEADS
The CT250 Maximum MOI Draw Driver Series combines every aspect of technology possible to produce straighter and longer drives. The width and breadth of the body have been expanded to increase the perimeter weighting and locate the center of gravity low and to the back. The increased perimeter weighting raises the moment of inertia for maximum forgiveness. The rearward c.g. location
optimizes trajectory. The distribution of the mass is biased towards the heel and the visible heel weighting screw enhances this bias. The positioning of more weight in the heel in the wide body design promotes easier head rotation through the hitting zone, reducing a slight to moderate slice ball flight. The 1° closed face angle also promotes a more square face at impact, as well as increases the effective loft (ex: 10.5° with 1° closed face produces 11.5° effective loft at impact) for higher, straighter shots. The expanded face surface also increases the perimeter weighting and instills confidence at address.
Highlights:
- Wider body design increases Moment of Inertia (resistance to twisting) for more forgiveness on off-center hits.
- Heel biased weighting aids in head rotation, helping to square the clubface at impact.
- Low and back center of gravity location promotes higher launch angles for optimum distance.
- Four Piece Forged, 6-4 Titanium construction.
- Match with CT250 50 gram high performance graphite shaft for higher clubhead speeds.
- 1° closed face angle at address helps reduce the slight to moderate slice ball flight.
- Available in 9.5°, 10.5°, and 12° loft options.
- Recommended ferrule 62OW
We Also Recommend:
|
As low as $109.99 |
|
As low as $39.99 |
|
As low as $12.99 |
Tell a Friend about this item
(3 customer reviews)
Overall Rating: 
Write an online review and share your thoughts with other customers
Sort Reviews: Newest | Oldest | Highest Rating | Lowest Rating
- Thursday, July 10, 2008
Awesome
Reviewed By: Paul (Raleigh, NC)
I am going to keep this very simple...My Taylormade Tour Burner TP with Aldila Voo Doo shaft is laid to rest....have built the CT 250 draw with V2 shaft...better fitting for me and club has a much better flight pattern and an excellent feel...I'm impressed with the Maltby products.
- Tuesday, May 27, 2008
CT250 Driver
Reviewed By: Joe (Townsend, MA)
A few buckets of balls and 2 rounds with my new CT250 driver and I am already seeing a huge increase in my driving distance. My last 9 with the league I out drive everyone on almost every hole! A significant improvement over my old driver! I assembled the club myself using the recommended Maltby shaft. WHat a great club!
Joe
- Monday, April 28, 2008
Cut down on my slice
Reviewed By: Pete (Phoenix, AZ)
I tend to slice my drive and over swing. The CT250 Draw Driver didn't eliminate the slice completely, but drastically cut down my slice. I would dare call my shot a slight fade rather than a slice. Pretty unusual to play in the fairway. Nice to play a whole round with only 1 ball too.
Read More Reviews
|
|
1.800.848.8358
;)
